Commercial Aluminum Grilles & Counter Doors
31298 San Antonio St. - Hayward - CA - 510.489.6881
SERVING:
FREMONT
 HAYWARD NEWARK UNION CITY
R

&

S

 R&S was founded in 1963 as a repair and installation business; quick growth and increasing demand resulted in the start of limited production of a basic service door. Since then, regional manufacturing/ distribution operations have been established to provide a full line of quality rolling door products to an expanding dealer network. R&S is dedicated to being "the manufacturers with the personal touch".
Aluminum Grilles Standard Features
6" Minimum diameter structural steel pipe barrel
Optional aluminum or galvanized steel hood
Oil tempered torsion on continuous cold-rolled steel shaft
Steel plate brackets attached to wall angles
Aluminum grille curtain (see patterns below)
Extruded aluminum tubular bottom bar
Extruded aluminum guides & continuous steel wall angles
Operation
Width
Height
Push-Up
to 14'
to 9'
Chain

or

Crank
to 16' 16' -24' 16' -24' 16' -24'
to 9' to 9' -14' to 8' 8'-14'
Motor
Consult
Factory
Grille Curtain Patterns

Grilles Now Available in Stainless Steel
Straight Link
Brick Pattern
Standard Grille

Standard straight link pattern for grilles in normal usage such as shopping malls and storefronts. All aluminum curtain is formed of horizontal rows of 5/16" aluminum rods spaced 1 1/2" apart to be connected by vertical 3/4" aluminum links spaced 9" apart.
Heavy Grille

Heavy straight link pattern for grilles in high usage applications such as parking garages. Curtain is formed of horizontal rows of 5/16" aluminum rods alternating with 1/4" galvanized steel rods covered with a 5/16" aluminum tube sleeve. Rods are spaced 1 1/2" apart and connected by vertical 3/4" aluminum links spaced 9" apart. A brick pattern is available.
OPTIONS
High Cycle Construction: designs to provide up to 150,000 operating cycles.

Emergency Egress System: recessed pull handle in a flush mount enclosure mechanically disconnects motor operator to provide partial opening of grille for emergency exit.

Support Tubes: square steeltubes attached to floor and structure above to provide mounting for grille.

Sloped Footpiece: for special sill conditions.

Soffit Flange Cover: 5 1/2" wide flange on bottom of footpiece to conceal slot required for above ceiling installations.

Cylinder Locks: on footpiece.

Hood: formed from galvanized steel or aluminum sheet

Fixed Grille Panel: Grille curtain in a supporting frame.

Anodized Finish: clear, dark bronze, gold, black and other color anodized finishes on curtain, footpiece, guides and hood.

Special Accessories: safety bearing functioning as an inertia brake, tubular motor operator completely contained within the barrel, powder coating finishes available in a variety of colors.
HOME PAGE
 ADDITIONAL INFORMATION OR REQUEST FOR QUOTE
R & S Counter Doors
"Counter Fire Doors"

The integrated automatic fire protection of a rolling fire door with the compact design and neat appearance of a counter door.

 Options

Smoke Detectors: Photoelectric (detects smoke and heat) or ionization (detects combustion); requires connection to a release device with compatible voltage.

Release Devices: Electro-thermal and McCabe links (normally open circuits); electro-magnetic and time delay failsafe releases (normally closed circuits).

Perimeter Gasketing: Brush seals factory applied to guides and foot piece, field installed on header, to aid insmoke and draft control.

Vision Lites: SIngle or multiple 4" wide cut-outs, glazed with clear wire glass (1 1/2 hour rating.
"Aluminum Counter Doors"

Anodized aluminum components combine light weight, a smooth bright finish and excellent corrosion resistance.
"Steel & Stainless Steel Counter Doors"

These doors combine the strength and durability of a rolling service door with compact design.
HOME PAGE
ADDITIONAL INFORMATION OR REQUEST FOR QUOTE
When you want the best …

call R & S

A Service Company
OVER 35 YEARS OF SERVICE

IN CALIFORNIA
24-HOUR EMERGENCY SERVICE

7 DAYS A WEEK